The Surgical Machine Cranial Oscillating Taladros De Cirugia Drill Medical Oscillating Saw is a high-precision neurosurgical tool designed for cranial procedures such as craniotomies and skull base surgeries.
NS-1511
ruijin
Equipped with a brushless motor and oscillating blade technology , it delivers 15,000 oscillations/min with 1–3mm amplitude adjustment to ensure precise bone cutting while minimizing thermal damage to underlying tissues. Certified by CE, FDA, and ISO 13485 , this system meets the highest sterilization standards, with components autoclavable at 134–138°C . Its ergonomic design (weight: 0.85 kg ) and wireless operation (powered by a 14.4V lithium-ion battery ) reduce surgeon fatigue during prolonged neurosurgical interventions.
The oscillating blade operates at 15,000 oscillations/min with adjustable amplitude (1–3mm) , allowing surgeons to adapt to bone density variations. A cooling irrigation system prevents thermal injury to the brain, ensuring safe and efficient cutting even in delicate cranial procedures.
The ±0.01mm blade alignment guarantees accurate bone contouring, while automatic torque limiting (19 Nm) prevents over-penetration. A blade guard system protects soft tissues during cranial splitting, reducing the risk of accidental injury.
Weighing 0.85 kg with a non-slip grip , the tool minimizes wrist strain during 3+ hour surgeries. All surgical-contact components are autoclavable at 134–138°C , and the IPX7 waterproof rating allows cleaning under running water.
The system supports Stryker and Aesculap-compatible blades (6–18mm width) , making it ideal for hospitals using multi-vendor equipment. A tool-free blade release enables quick changes in <10 seconds .
The 14.4V lithium-ion battery provides 90+ minutes of continuous use per charge, with a rapid-charging system (3 hours to full capacity). A smart battery management system ensures consistent power output even at low charge levels.
Craniotomy: Used in tumor resection and aneurysm repair, delivering precise bone flap creation with minimal postoperative deformities.
Skull Base Surgery: Enables access to complex anatomical regions like the pituitary gland and cerebellopontine angle.
Trauma Surgery: Valuable in emergency cranial decompression, with cordless design enhancing mobility in trauma units.
Pediatric Neurosurgery: The lightweight design and adjustable speed (0–15,000 oscillations/min) make it suitable for delicate pediatric skull procedures.
Q: Can the saw be used for spinal surgeries?
A: Yes, it includes a 5mm arthroscopic adapter for minimally invasive spinal decompression.
Q: What is the maximum blade depth?
A: The saw supports up to 18mm depth , suitable for most cranial and spinal applications.
Q: Is the battery compatible with third-party chargers?
A: Yes, it supports 14.4V lithium-ion chargers from major brands like Stryker and Conmed.
Q: How is the blade sharpness maintained?
A: The titanium nitride coating enhances blade hardness, ensuring sharpness for 50+ procedures .
| handpiece | working voltage | 14.4V |
| output power | 20W above | |
| unit rise in temperature | less than 30 degree celcius | |
| Charger | input voltage | AC220V/50Hz |
| output power | 14.4V,900mA | |
| input power | 30VA | |
| Battery | voltage | 14.4V |
| charging time | about 3 hours | |
| Saw | frequency | 0-18000rpm |
| non-load noise | less than 75dB |
Equipped with a brushless motor and oscillating blade technology , it delivers 15,000 oscillations/min with 1–3mm amplitude adjustment to ensure precise bone cutting while minimizing thermal damage to underlying tissues. Certified by CE, FDA, and ISO 13485 , this system meets the highest sterilization standards, with components autoclavable at 134–138°C . Its ergonomic design (weight: 0.85 kg ) and wireless operation (powered by a 14.4V lithium-ion battery ) reduce surgeon fatigue during prolonged neurosurgical interventions.
The oscillating blade operates at 15,000 oscillations/min with adjustable amplitude (1–3mm) , allowing surgeons to adapt to bone density variations. A cooling irrigation system prevents thermal injury to the brain, ensuring safe and efficient cutting even in delicate cranial procedures.
The ±0.01mm blade alignment guarantees accurate bone contouring, while automatic torque limiting (19 Nm) prevents over-penetration. A blade guard system protects soft tissues during cranial splitting, reducing the risk of accidental injury.
Weighing 0.85 kg with a non-slip grip , the tool minimizes wrist strain during 3+ hour surgeries. All surgical-contact components are autoclavable at 134–138°C , and the IPX7 waterproof rating allows cleaning under running water.
The system supports Stryker and Aesculap-compatible blades (6–18mm width) , making it ideal for hospitals using multi-vendor equipment. A tool-free blade release enables quick changes in <10 seconds .
The 14.4V lithium-ion battery provides 90+ minutes of continuous use per charge, with a rapid-charging system (3 hours to full capacity). A smart battery management system ensures consistent power output even at low charge levels.
Craniotomy: Used in tumor resection and aneurysm repair, delivering precise bone flap creation with minimal postoperative deformities.
Skull Base Surgery: Enables access to complex anatomical regions like the pituitary gland and cerebellopontine angle.
Trauma Surgery: Valuable in emergency cranial decompression, with cordless design enhancing mobility in trauma units.
Pediatric Neurosurgery: The lightweight design and adjustable speed (0–15,000 oscillations/min) make it suitable for delicate pediatric skull procedures.
Q: Can the saw be used for spinal surgeries?
A: Yes, it includes a 5mm arthroscopic adapter for minimally invasive spinal decompression.
Q: What is the maximum blade depth?
A: The saw supports up to 18mm depth , suitable for most cranial and spinal applications.
Q: Is the battery compatible with third-party chargers?
A: Yes, it supports 14.4V lithium-ion chargers from major brands like Stryker and Conmed.
Q: How is the blade sharpness maintained?
A: The titanium nitride coating enhances blade hardness, ensuring sharpness for 50+ procedures .
| handpiece | working voltage | 14.4V |
| output power | 20W above | |
| unit rise in temperature | less than 30 degree celcius | |
| Charger | input voltage | AC220V/50Hz |
| output power | 14.4V,900mA | |
| input power | 30VA | |
| Battery | voltage | 14.4V |
| charging time | about 3 hours | |
| Saw | frequency | 0-18000rpm |
| non-load noise | less than 75dB |
